H.264 vs. H.265: Video Codecs Compared
Universal compatibility against half the bitrate: what each codec costs, when to choose which, and why it matters to network economics.

Two codecs carry most of the video moving across networks today. H.264 is the one that works everywhere, and H.265 is the one that halves the bitrate. The choice between them is a trade between compatibility and efficiency, and which side wins depends on what you are delivering and to whom.
H.264
Also called AVC, H.264 has been the default for well over a decade. Its significant property is not technical: it is that essentially every device, browser and platform decodes it, usually in hardware.
That universality is why it remains the safe choice. A stream encoded in H.264 plays on old phones, cheap set-top boxes and televisions nobody has updated, which is exactly the population an operator cannot afford to exclude.
It also decodes cheaply, which matters on low-powered hardware, and its encoders are mature and fast.
The cost is size. For a given quality, H.264 needs meaningfully more bitrate than newer codecs, and that difference is paid for on every stream delivered.
H.265
HEVC achieves roughly the same perceived quality at around half the bitrate. That is the entire argument, and it is a strong one.
It also handles high resolutions properly. 4K over H.264 is possible and wasteful; over H.265 it becomes practical at a bitrate a normal connection can sustain, which is why 4K delivery and H.265 arrived together.
The costs are real. Decoding requires more processing, so hardware support matters and older devices lack it, falling back to software decoding that drains batteries and sometimes cannot keep up. Encoding is slower and more demanding, which affects live workflows more than on-demand. And licensing has been more complicated than for H.264, which slowed adoption in ways unrelated to the technology.
Choosing
Delivering to a mixed installed base points to H.264, or to encoding both and selecting per device. Excluding subscribers with older equipment to save bandwidth is rarely a good trade.
Delivering 4K points to H.265. The bitrate at that resolution is otherwise difficult to sustain.
Bandwidth-constrained delivery points to H.265 wherever the receiving device supports it, since halving the bitrate is the largest single saving available.
Live production favours H.264 where encoding time is tight, though this has become less of a constraint as encoders have improved.
In practice, a serious platform encodes multiple renditions and picks based on what the client reports it can decode, which sidesteps the choice entirely at the cost of encoding and storing more.
What comes next
AV1 improves again on H.265 and is royalty-free, which addresses the licensing friction directly. Hardware decoding support is now common in recent devices and absent in older ones, so it is following the same adoption curve from the same starting position.
The pattern repeats each generation: the newer codec is more efficient, and the older one is what everything can play.
Why it matters to an operator
Codec efficiency translates directly into network cost. Video dominates consumer traffic, so halving the bitrate of the dominant traffic class is a larger lever than most capacity planning decisions.
It also affects what a given connection can support. A subscriber whose service struggles with 4K over H.264 may handle it comfortably over H.265, which changes what can be sold to them without any change to the network.
For operators optimising bandwidth delivery, Jaze ISP Manager integrates with leading BNG vendors over both RADIUS and Diameter, so policy can be delivered flexibly and the subscriber experience stays consistent.


